High Temperature Limit Switches
Series 145,147 temperature limit controllers may also be used on either gas or electric kilns with any type of thermocouple. They offer the protection of either high or low temperature limit control.
Series SD6L is a 16 DIN controller for mounting on the control panel's face. Use on any equipment with any thermocouple......$210.00
Series SD6L
The Watlow Series F4S/D is a 1/4 DIN ramping/profiling controller that can store up to 40 files & 256 steps, making it perfect for operations like fusing that involove many steps. The interface is a four-line high resolution LCD displat. It is by far the most user friendly controller we have come across. Choose Series F4S for single zone or Series F4D for dual zone. This controller can also be configured with communications feature to network with PC's and to access via the internet. These controllers may be used on either gas or electric kilns with any type of thermocouple.
F4S....$840.00
F4D....$1040.00
Series F4S/D
The Watlow Series 981C is a 1/8 DIN ramping/profiling controller. This controller stores up to 4 files of 6 steps each. The files may be linked together to form a file of up to 24 steps. The Series 981 features dual display, and may be used on either gas or electric kilns with any type of thermocouple
981C....$555.00
Series 981C
The Watlow Series SD31 is a 1/32 DIN ramping controller. This controller has a single display, a universal thermocouple input and universal process output. The Series SD31 is a simple controller that we use for requlating out heat exchanger dilution air blower.
The Watlow Series SD9R is a 1/8 DIN ramping/profiling controller. This controller stores up to 4 files of 10 steps each. The 4 files may be linked together to form a file of up to 40 steps. The Series SD9R features dual display, and may be used on either gas or electric kilns with any type of thermocouple.
SD31....$164.00
SD9R....$365.00
SD31
SD9R
Watlow Din-A-Mite SCRs that are touch-safe, easy to install, and feature built in heat sinks. We rate the amperage at 122°F because that is the most common high temperature we find in panels mounted on the sides of kilns.
Style C Din-A-Mites are 3 pole relays that can switch either one leg up to 75 amps at 122°F for single phase applications or two legs up to 65 amps at 122°F for 3 phase applications. The Style C is fan cooled and is configured to receive a 4-20 mA input signal from the temperature controller. Please call for proper fuse and fuse holders for your application
Style C One Leg....$213.00
Style C Two Leg....$235.00
Din-A-Mite Style C
Style D Din-A-Mites are single pole relays that can switch up to 80 amps at 122°F and feature built in fuses. They can switch up to 100 amps at 86°F.
Style D....$370.00
Din-A-Mite Style D
