Eclipse Low Pressure Proportional Mixers

These mixers are commonly used for glory holes, but can also be used for furnaces and garages when available gas pressure is too low for other burners. They will efficiently mix any commercially available fuel gas from 4"w.c. to 16 oz. with air from 2.5 oz through 4 psi. They also provide single valve control.

Please refer to our glory hole size table for recommended BTU information.

This table shows Maximum BTU/HR ratings with regards to Mixer Model #, Gas Type, and Fan Pressure

Understanding Glory Hole Combustion (article with illustrations)

BTU/HR ratings x 1000
Mixer Model #	Gas Type	Fan Pressure in Ounces
Mixer Model #	Gas Type	2.5oz	4oz	6oz	8oz	10oz	12oz	16oz
64-LP	Natural	100	200	200	200	200-300	200-300	200-400
64-LP	Propane	150	150-250	150-250	150-300	200-350	200-350	200-450
84-LP	Natural	200-400	300-500	300-700	300-700	400-700	400-700	500-700
84-LP	Propane	200-400	300-450	300-500	350-550	400-600	400-750	500-1000

Dimensions and Prices
Mixer Model #	Gas Inlet Size	Air Inlet Size	Mixture Outlet Size	Prices
Mixer Model #	Gas Inlet Size	Air Inlet Size	Mixture Outlet Size	LP	LPB	LPG	LPBG
64-LP	1" N.P.T	1-1/2" N.P.T	1-1/2" N.P.T	$195.00	$311.22	$627.20	$764.90
84-LP	1" N.P.T	2" N.P.T	2" N.P.T	$295.00	$420.29	$838.99	$934.18

LP (Basic) Assembly includes mixing tee, air jet and venturi sleeve.

LPB Assembly includes LP assembly plus a butterfly valve.

LPG Assembly includes LP assembly plus a zero governor and a gas cock.

LPBG Assembly includes LP assembly plus a butterfly valve, zero governor and a gas cock.

Please allow at least 3 to 4 weeks lead time.

Prices and lead times are subject to change without notice.

The tables above are copyright Wet Dog Glass, LLC, May 2000

Data on these tables comes from Eclipse Combustion Selection Tables 652-3 and 652-4.

When ordering, please specify model number, gas type, fan pressure, and BTU's required.

If you need assistance, feel free to email us with questions.